Mag Loops



Baby Loop Manual

Please take your time setting these up, use 1.5mm^2 cable for the motor drive cable and ensure the feed line is perfect.

remember 9 is open and 3 is close! set in manual mode and test.. if it goes the other way reverse the polarity of the motor drive cable..

loops are angry antennas, they will complain at every opportunity if they don’t enjoy their location.. move it! they should be no higher than 2.5 mtrs to the bottom of the loop.. they hate roof tops!

the Firmware for the MK2 controller cml_034  firmware-loop-atu-2-0

The instructions how to update the firmware firmware-upgrading-instructions-feb-2016-pdf